FORD 2015 F-550 v.2 - Manual (Page 127)

The system includes two primary features,
a garage door opener and a platform for
remote activation of devices within the
home. This functionality allows you to
program garage door openers as well as
security devices and home lighting
systems.
You can find additional system information
online at www.learcar2U.com or by calling
the toll-free help line on 1-866-572-2728.
E164776
Rolling Code Programming
Note: If you do not follow the time-sensitive
instructions, the device will time out and
you will have to repeat the complete
procedure.
Note: It may be helpful to have another
person assist you in programming the
transmitter.
1. Switch the ignition on.
2. Press and hold the outer two buttons for
1–2 seconds, then release.
E164777
Note: You may need a ladder to reach the
unit and you may need to remove the cover
or lamp lens.
Note: If you cannot locate the learn button,
see the Owner’s Manual for your garage
door opener or call the toll-free help line at
1-866-572-2728.
3. Press the learn button on the garage
door opener motor.
E142659
Note: You will have 10–30 seconds to
complete the following steps.
4. Return to your car.
5. Press and hold the function button you
would like to use to control the garage
door. You may need to hold the button
from 5–20 seconds, during which time the
selected button LED lamp will flash slowly.
E164776
6. When the garage door moves, release
the button within one second. The LED
lamp will flash rapidly until programming
is complete.
7. Press and release the button again. The
garage door should move, confirming that
programming is successful. If your garage
door does not operate, repeat the previous
steps.
The LED lamp above the selected button
will illuminate to confirm that the system
is responding to the button command.
124
Super Duty (), enUSA
Universal Garage Door Opener
(If Equipped)