Information messages, Information displays – FORD 2015 F-550 v.1 User Manual
Page 95
Compass/Transmission indicator
display (if equipped)
The compass heading will display in the
upper right corner of the information
display; the transmission gear indicator
displays in the right side of the information
display when using the SelectShift
Automatic™ transmission feature. These
displays will not be shown in all screen
modes. For example: when programming
certain vehicle features or in certain
information menus.
INFORMATION MESSAGES
Note: Depending on your vehicle options
and instrument cluster type, not all of the
messages will display or be available.
Additionally, the information display may
abbreviate or shorten certain messages.
Press the RESET button for Type 1 displays
or the OK button for Type 2 displays to
acknowledge and remove some messages
from the information display. The
information display will automatically
remove other messages after a short time.
You need to confirm certain messages
before you can access the menus.
AdvanceTrac™
Action
Message
The system detects a condition that requires service. Have
the system checked by an authorized dealer.
SERVICE ADVAN-
CETRAC
The driver has disabled the stability control system. See
Using Stability Control (page 167).
ADVANCETRAC OFF
The driver has disabled the traction control system. See Using
TRACTION CONTROL
OFF
Alarm
Action
Message
An unauthorized entry has triggered the alarm. See Anti-Theft
TO STOP ALARM
START VEHICLE
The security system has detected a fault. Have the system
checked by an authorized dealer.
SECURITY SYSTEM
FAULT
92
Super Duty (), enUSA
Information Displays