beautypg.com

Towing – FORD 2015 F-550 v.1 User Manual

Page 202

background image

You can adjust the amount of

initial trailer brake output by

selecting one of three settings

through the message center.
Ford has tested the trailer brake
controller to be compatible with
several major brands of
electric-over-hydraulic trailer
brakes. Contact an authorized
dealer for information on which
brands you can use.

The controller user interface
consists of the following:

A: + and - (Gain adjustment

buttons): Pressing these buttons

adjusts the controller's power

output to the trailer brakes in 0.5
increments. You can increase the

gain setting to 10.0 (maximum

trailer braking) or decrease it to 0

(no trailer braking). Pressing and

holding a button raises or lowers
the setting continuously. The gain

setting displays in the message

center as follows: TBC GAIN =
XX.X.
B: Manual control lever: Slide the
control lever to the left to switch

on the trailer's electric brakes
independent of the tow vehicle's.

See the following Procedure for

adjusting gain section for

instructions on proper use of this

feature. If you use the manual

control while the brake is also
applied, the greater of the two
inputs determines the power sent
to the trailer brakes.

Stop lamps: Using the manual

control lever lights both the

trailer brake lamps and your

vehicle brake lamps except the

center high-mount stop lamp,
if you make the proper
electrical connection to the
trailer. Pressing your vehicle
brake pedal also lights both
trailer and vehicle brake lamps.

The controller shows gain setting,
output bar graph, and trailer
connectivity status in the
information display. They appear
in the information display as

follows:

TBC GAIN = XX.X NO

TRAILER: Shows the current

gain setting during a given
ignition cycle and when

adjusting the gain. This also

displays if you use the manual

control lever or make gain

adjustments with no trailer
connected.

TBC GAIN = XX.X
OUTPUT=/ / / / / /: Displays

when you push your vehicle's

brake pedal, or upon use of the

manual control. Bar indicators

light in the information display

to indicate the amount of
power going to the trailer
brakes relative to the brake

pedal or manual control input.

One bar indicates the least
amount of output; six bars
indicate maximum output.

199

Super Duty (), enUSA

Towing

This manual is related to the following products: