Seat, mirror and steering wheel memory, Adju stmen ts – BMW M5 Sedan 2006 User Manual
Page 44
Adju
stmen
ts
42
gram provides increased lateral support on both
sides when driving through a quick succession
of alternating curves.
Press program button once:
>
"Comfort" program: one LED
>
"Normal" program: two LEDs
>
"Sport" program: three LEDs
To switch off: press button longer.
You can also activate your preferred program
for the active backrest width adjustment of the
driver's seat with the button on the steering
wheel, refer to MDrive on page
.
Easy entry/exit*
To facilitate entry and exit, the backrest width
temporarily opens all the way.
Seat, mirror and steering
wheel memory
You can store and request two different posi-
tions for the driver's seat and passenger seat
*
,
external rearview mirrors, and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page
.
2.
Set the desired seat, exterior mirror and
steering wheel positions.
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
<
Convenience mode
1.
Open the driver's door after unlocking or
switch on radio readiness.
2.
Briefly press the desired memory button
1
or
2.
The system immediately cancels the
adjustment procedure when you briefly
press one of the seat adjustment buttons or
one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off.
2.
Press the desired memory button
1 or 2
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Activating with remote control
The last positions of the driver's seat, the exter-
nal rearview mirrors, and steering wheel are
stored for the remote key currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
iDrive, for explanation of principle, refer to
page
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Vehicle settings" and press the
controller.
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG