Repairing flat tire with m mobility system, Replacing components – BMW M5 Sedan 2006 User Manual

Page 192

Replacing components

190

Press together the two clips at the top and
bottom on the bulb fitting and remove the
bulb fitting.

Backup lamps:
Remove and replace the bulb.
Other lamps:
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.

Lamps in luggage compartment lid

License plate lamp

Bulb 5 watts, C 5 W

Insert screwdriver into the slot and press to
the right, refer to arrows. This releases the
lamp.

Remove the lamp and replace the bulb.

Repairing flat tire with

M Mobility System

To repair a flat tire, an M Mobility System is pro-
vided in the BMW M5. Using this system you
can apply a sealant in the inside of the tire, seal
off the damaged area, restore the tire inflation
pressure and then continue driving.

Safety measures in case of a breakdown:
park the vehicle as far as possible from

passing traffic and on solid ground. Switch on
the hazard warning flashers.
Lock the steering wheel in straight-ahead set-
ting of the wheels. Set the handbrake and
engage the first or reverse gear. Have all vehicle
occupants get out of the vehicle and ensure
that they remain outside the immediate area in a
safe place, such as behind a guardrail.
If a warning triangle or portable hazard warning
lamp is required, set it up on the roadside at an
appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.

Preparation

The M Mobility System is located in the lug-
gage compartment under the floor panel flap.
Do not remove foreign bodies which have pen-
etrated the tire if possible.

Corresponding information on using the
M Mobility System are also provided on

the device.

Before using the M Mobility System,
observe the information on the sealant

bottle.

Pull the sticker for the speed limit off the sealant
bottle and apply it to the steering wheel.

Please observe the best-by date on the
sealant bottle.