BMW 325i Sedan 2006 - Manual (Page 51)

Re
fe
re
n
c
e
A
t a
g
lanc
e
Co
n
tr
o
ls
D
riv
in
g tip
s
M
o
b
ilit
y
49
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal indicator
has failed.
After switching off the ignition, make sure that
the roadside parking lamps are not switched
on.
<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
Operating principle, refer to page
61 .
1. Lightly push button 1 in the turn indicator
stalk up or down repeatedly until the symbol
appears in the display accompanied by the
word "SET".
2. Press button 2.
3. Lightly push button 1 in the turn indicator
stalk down repeatedly until the symbol
appears in the display.
4. Press button 2.
5. Use button 1 to select:
>
Brief indication of a turn.
>
Triple turn signal.
6. Press button 2.
The setting is stored.
Wiper system
1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
rain sensor *
4 Cleaning windshield and headlamps *
5 Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers
The lever automatically returns to its initial posi-
tion when released.
Online Edition for Part-No. 01 41 0 012 351 - © 03/06 BMW AG