BMW M6 Convertible 2007 - Manual (Page 56)

Adju
sting
54
5. Select the desired function unit and press
the controller.
Operating function
Press the button on the steering wheel.
If you have programmed "Navigation voice
instructions" for the button:
> To switch voice instructions on/off:
Press the button longer.
> To repeat the last voice instruction:
Press the button.
MDrive
With MDrive you can configure several individ-
ual settings for your vehicle on the Control Dis-
play and activate them simultaneously with the
button on the steering wheel.
Configuring settings
With the ignition switched on you can change
the settings of MDrive on the Control Display.
iDrive, for explanation of principle, refer to
page
16 .
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "MDrive" and press the controller.
The functions contained in MDrive are dis-
played:
> "SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: shifting modes and Drive-
logic driving programs, refer to page
62
> "EDC"
Programs of the Electronic Damping
Control, refer to page
84
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page
82
> "POWER"
Programs of the M Engine Dynamic
Control, refer to page
64
> "Head-Up Display" *
Views of the Head-Up Display, refer to
page
91
You can reset all settings for MDrive to their
default values:
> "Reset to default"
4. Select the desired function.
5. Press the controller.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG