BMW M3 Convertible 2008 - Manual (Page 64)

E
ve
ryth
ing un
de
r co
nt
rol
62
8 Setting formats and units of measure,
resetting to factory settings 62
9 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
21
> Response during unlocking
procedure
19
> Automatic locking 23
> Pathway lighting 76
> Daytime running lamps 77
> Triple turn signal activation 55
> Seat memory 39
10 Switching Shift Lights * on/off 53
Exiting displays
The outside-temperature reading and the time
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Formats and units of measure
You can set formats and units of measure.
1. Switch on the ignition, refer to page 46 .
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
4. Use button 1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Resetting to factory settings
You can reset the settings for formats and units
of measure to factory settings.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
3. Use button 1 to select "RESET".
Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG