Head restraints, Head restraints be – BMW M3 Convertible 2008 User Manual
Page 39
37
Backrest width*
You can change the width of the backrest to suit
your individual preferences by adjusting the lat-
eral-support pads.
Press the front or rear end of the switch.
Backrest width decreases or increases accord-
ingly.
Longitudinal adjustment from outside/
behind
To move the front seats forward or backward
from outside or from one of the rear seats: with
the door open, press the front end
1 or rear end
2 of the switch.
Head restraints
A correctly adjusted head restraint reduces the
risk of neck injury in the event of an accident.
Adjust the head restraint in such a way
that its center is at approx. ear level. Oth-
erwise, there is an increased risk of injury in the
event of an accident. Only remove a head
restraint if no one will be sitting on the seat in
question. Reinstall the head restraint before
transporting anyone on that seat. Otherwise,
the passenger will be without protection from
the head restraint.
<
Front seats
Coupe: height adjustment
>
To raise: pull up.
>
To lower: press the button, arrow
1, and
slide the head restraint down.
Coupe: removing
1.
Pull up as far as it will go.
2.
Press the button, arrow
1, and pull the head
restraint all the way out.
Convertible: height adjustment
>
To raise: press the button upward.
>
To lower: press the button downward.
Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG