beautypg.com

Windows, Opening and closing – BMW X5 4.8i 2008 User Manual

Page 40

background image

Opening and

closing

38

Replacing battery

The remote control for comfort access contains
a battery which must be replaced if necessary.

1.

Remove integrated key from remote con-
trol, refer to page

28

.

2.

Remove cover.

3.

Lay in new battery with positive side facing
upward.

4.

Press cover closed.

Dispose of used batteries at a collection
point or at your BMW Sports Activity

Vehicle Center.

<

Windows

To prevent injuries, exercise care when
closing the windows and keep them in

your field of vision until they are shut.
Always take along the remote control when you
leave the vehicle, otherwise children could, for
example, operate the windows and injure them-
selves.

<

Opening, closing

>

Press switch to resistance point:
The window continues to open as long as
you keep the switch pressed.

>

Press switch beyond resistance point:
The window opens automatically. Pressing
the switch again stops the opening move-
ment.

You can close the windows in the same manner
by pulling the switch.
Separate switches for the rear windows are
located in the rear.
For information on using convenient operation
at the door lock or with the remote control, refer
to page

30

or

32

.

For information on comfort closing with comfort
access, refer to page

37

.

After switching off ignition

You can still operate the windows with the
remote control removed or the ignition
switched off for approx. 1 minute, as long as
neither of the front doors has been opened.

Pinch protection system

If the closing force rises beyond a predefined
threshold during closing, the system will stop
moving the window prior to lowering it again
slightly.

Despite the pinch protection system,
inspect the window's travel path prior to

closing it, as the safety system might fail to
detect certain kinds of obstructions, such as
thin objects, and the window would continue
closing.
Do not install any accessories in the range of
movement of the windows, otherwise the pinch
protection system will be impaired.

<

Closing without pinch protection
system

In case of danger from outside or if, for example,
ice on the window prevents normal closing, pro-
ceed as follows:

1.

Pull the switch beyond the resistance point
and hold. The pinch protection system is
limited and the window opens slightly if the
closing force exceeds a certain value.

2.

Pull the switch beyond the resistance point
and hold again within approx. 4 seconds.

Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG

This manual is related to the following products: