BMW 650i Convertible 2008 - Manual (Page 65)

Co
n
tr
o
ls
63
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
the transmission lock after parking the vehicle
at its destination.
Releasing
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever.
3. Reach into the trim-piece opening, arrow 1,
and firmly pull the trim piece upward,
arrow
2.
4. Remove cover over the opening, refer to 5.
5. Insert a screwdriver from the onboard tool
kit, refer to page
223 , into the opening,
arrow 1.
6. Pull the screwdriver toward the rear until it is
heard to engage, arrow
2, and leave it
inserted in the opening. The transmission
lock is released.
Locking
1. Pull out the screwdriver upward.
The transmission lock is locked again.
2. Reinstall the cover and the trim piece.
Information on jump starting and towing from
page
228 .
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals
Move the lever beyond the resistance point.
To switch off manually, only press the lever to
the resistance point.
Atypically rapid flashing of the indicator
lamp indicates the failure of a turn signal
lamp. <
Signaling briefly
Press the lever to the resistance point and hold
it there as long as you wish to signal.
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG