BMW 550i Sedan 2008 - Manual (Page 82)

E
ve
ryth
ing un
de
r co
nt
rol
80
Average fuel consumption
The average fuel consumption is calculated for
the time during which the engine is running.
To reset average fuel consumption: press BC
button on turn signal lever for approx. 2 sec-
onds.
For different routes
You can display the average speed and average
consumption for two different routes on the
Control Display, refer to the following and to
Trip computer
* .
Displays on Control Display
You can also call up the computer via iDrive.
For operating principle refer to page
16 .
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
* :
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination and
remaining distance:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
* , refer to page 142 .
> Cruising range
> Average speed
> Average fuel consumption
Resetting values
You can reset the values for the average speed
and average fuel consumption:
1. Select the respective menu item and press
the controller.
2. To confirm your selection, press the con-
troller again.
Entering a distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance to
your destination. If needed, hold it against a
slight resistance to enter a larger differ-
ence.
3. Press the controller to apply the setting.
The distance is automatically preset during the
destination guidance of the navigation sys-
tem
* .
Trip computer*
The trip computer is suitable, for example, for a
vacation trip.
Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG