BMW 335i Convertible 2008 - Manual (Page 236)

Replacing components
234
2. Loosen the bulb holder at the clip, see
arrow, and pull out.
3. Turn signal indicator: apply gentle pressure
to the bulb while turning it to the left for
removal and replacement.
Backup lamps and brake lamps: take out
the bulbs and change them.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo bay.
Convertible
1. Turn the screws on the corresponding side,
see arrow, by 90° and remove the cover.
2. While applying light pressure, turn the bulb
holder of the turn signal bulb to the left.
3. Remove and replace the bulb.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo bay.
License plate lamp and center brake
lamp
These lamps use LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with Run-Flat Tires as
standard. This removes the need to change a
wheel immediately in the event of a puncture.
For information on continuing to drive with a
damaged tire, refer to Indication of a flat tire on
page
93 .
The symbol identifying Run-Flat Tires is a circle
with the letters RSC on the sidewall, refer to
Run-Flat Tires, page
222 .
When mounting new tires or changing over
from summer to winter tires and vice versa,
mount Run-Flat Tires for your own safety. In the
event of a flat, no spare wheel is available. Your
BMW center will be glad to advise you. Refer
also to New wheels and tires, page
222 .
The tools for changing wheels are avail-
able as optional accessories from your
BMW center. <
Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG