extended periods; otherwise, it may no longer
be possible to start the engine. It is preferable to
switch on the one-sided roadside parking
lamps, refer to page

Low beams

The low beams light up when the switch is in
position

2 and the ignition is on.

Defective lamps

The indicator lamp lights up:
At least one bulb of the exterior lighting
on the vehicle is defective.

Replacing bulbs, refer to page

112

Door handle lighting

When the parking lamps or low beams are
switched on, the interior door handles are also
illuminated. The intensity of the lighting is
adjusted using the instrument lighting control.

Welcome lamps

If, when parking the vehicle, you leave the light
switch in position

2 or 3, the parking lamps and

the interior lamps light up briefly when the vehi-
cle is unlocked with the remote control.

Pathway lighting

When you activate the headlamp flasher after
parking the vehicle and switching off the lamps,
the low beams will come on for a brief period.

You may also have this function deacti-
vated if you wish.

Daytime driving lamps*

If so desired, the light switch can remain in
position

0, 1, or 3.

In positions

0 and 3, after the ignition is

switched off, the exterior lighting is automati-
cally switched off. In position

1, the parking

lamps are lit after the ignition is switched off.
The parking lamps can be switched on as
needed as described under Parking lamps.

You can have the daytime driving lamps
activated on your vehicle.