Computer, Everything under control – BMW X3 xDrive30i 2009 User Manual

Page 50

Everything under control

The set time is transferred to the display of the
radio or displayed in the instrument cluster.

Display mode

Ignition key in position 0 or removed:
Press button

The time and display of the miles/kilometers
appear for a few seconds.

Computer

Mode selection

With the ignition key in position 1 or higher,
you can call up information from the computer
using the BC button in the turn signal lever.
A new function appears each time you briefly
press the BC button.
The following information is displayed in the
sequence indicated:

Time

Outside temperature

Average fuel consumption

Cruising range

Average speed

With the ignition key in position 1 or higher, the
last active setting is displayed.

If you wish, you can display the following
functions in a different unit of measure.

Outside temperature

Changing units of measure

7/6

During the display, hold down the button in the
turn signal lever until the display changes.

Outside temperature warning

If the outside temperature falls below approx.
+37.5

7/+36, the computer switches auto-

matically to the outside temperature display.
In addition, an acoustic signal sounds and the
display flashes for a short time. There is an
increased risk of icy conditions.

After an outside temperature warning has
been issued, the display returns to the

previous setting. You can have this activated/
deactivated.

Ice can also occur at temperatures
greater than +37.5

7/+36. For this rea-

son, drive carefully on bridges and shaded
roadways, for example. Otherwise, there is an
increased risk of accidents.

Clock

12 or 24 hour mode

If your vehicle is equipped with a computer, you
can have the time displayed in the 12 or 24 hour
mode.