BMW 328i xDrive Sports Wagon 2009 - Manual (Page 178)

Te
lephone
176
Turn the button during an instruction.
This volume for the instructions is maintained,
even if the other audio sources are set to mini-
mum volume.
The setting is stored for the remote control cur-
rently in use.
Calling
Dialing phone numbers
The connection to the desired subscriber is
established.
Correcting phone numbers
After the last spoken sequence of digits has
been repeated by the system, you can delete
this sequence of digits.
The command {Correct number} can be
repeated as often as you like.
Deleting phone numbers
All digits entered up to this point are deleted.
Voice phone book
A separate voice phone book is needed for
operation using voice commands.
The entries must be entered using voice com-
mands and are separate from the memory in the
mobile phone. In this case, phone numbers
stored on the mobile phone cannot be called up
or saved there using voice commands. Up to 50
entries can be set up. An entry always consists
of a name and a phone number.
Creating and editing a voice phone
book*
To store an entry:
An entry always consists of a name and a phone
number.
To delete an entry:
You can delete any entry from the voice phone
book.
To delete all entries:
{Delete phonebook} deletes all entries in the
phone book.
To read and dial entries:
You can have all entries in your voice phone
book read aloud in the order in which they were
entered and select a specific entry to establish a
connection:
1. {Dial number}.
2. Say the phone number.
For telephone calls abroad, say
{Plus}
and then the country code.
3. {Dialing}.
{Correct number}.
The digits are deleted.
{Delete}
1. {Save name}.
2. Say the name.
Saying the name for the voice phone
book should not take longer than
approx. 2 seconds.
3. Say the phone number after being
prompted to do so by the system.
4. To save the phone number:
{Save}.
1. {Delete name}.
The dialog for deleting an entry opens.
2. Say the name when prompted.
3. Confirm the query with {Yes}.
1. {Delete phonebook}.
The dialog for deleting the phone book
opens.
2. Confirm the query with {Yes}.
3. Confirm the query again with {Yes}.
1. {Read phonebook}.
The dialog for reading the phone book
opens.
2. Say {Dial number} when the desired
entry is read.
ba8_E9091_cic.book Seite 176 Mittwoch, 29. Oktober 2008 2:59 14
Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG