Driving – BMW M3 Sedan 2010 User Manual
Page 58
Driving
56
One lever for all functions
1 Store and increase desired speed
2 Store and decrease desired speed
3 Deactivate system, refer to page
4 Resume stored desired speed and dis-
tance, refer to page
5 Select distance to vehicle driving ahead,
refer to page
Storing current speed
Briefly press the lever, arrow
1, or briefly pull it,
arrow
2, at a driving speed of more than approx.
20 mph or 30 km/h.
The car's current speed is stored. It is displayed
on the speedometer and briefly in the instru-
ment cluster.
Increasing desired speed
Press or tap the lever to the resistance point or
beyond, arrow
1, until the desired speed is dis-
played.
>
Each time the lever is tapped to the resis-
tance point, the desired speed is increased
by approx. 1 mph or 1 km/h.
>
Each time the lever is tapped beyond the
resistance point, the desired speed is
increased by up to 5 mph or 10 km/h until
the maximum speed of 110 mph or
180 km/h is achieved.
The speed then displayed is stored and
achieved on a clear road.
Decreasing desired speed
Pull the lever, arrow
2, until the desired speed is
displayed.
The other functions work analogously to those
described under Increasing desired speed.
Selecting distance
>
Press downward:
Increase distance.
>
Press upward:
Decrease distance.
The selected distance is displayed in the instru-
ment cluster.
Distance 1
Distance 2
Distance 3
Distance 4
This is always the preset dis-
tance when you use the system
for the first time after starting the
engine.
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG