BMW M3 Sedan 2010 User Manual
Page 101
99
Raising the roller cover
Press the button: the roller cover is raised.
Before closing the rear window or tailgate,
press the roller cover downward until it
engages.
Expanding the cargo area
The rear seat backrest is divided. You can fold
down either division in order to expand the
cargo area.
Reach into the recess and pull forwards.
When folding the backrest back up, make
sure that the catch engages properly. If
you cannot see a red warning area in the recess,
the catch is properly engaged. Otherwise,
cargo can be thrown around inside the passen-
ger compartment and endanger the car's occu-
pants, e.g. in the case of braking or sudden
swerving.
<
Observe the instructions concerning the
safety belt on page
to ensure the best
possible personal protection.
<
Partition net
Do not let the partition net retract; other-
wise, there is a risk of danger and the par-
tition net could be damaged.
<
Use the loop strap to pull the partition net out of
the casing. Grip the bar on both ends and insert
it into the retaining fixtures, arrow
1. This can
best be done from the rear seat.
When you no longer require the partition net,
grip both ends of the bar and take it out of the
retaining fixtures, arrow
2. Let the partition net
slide into the casing slowly.
With cargo area expanded
1.
Fold down both rear seat backrests, refer to
Expanding the cargo area.
2.
Use the buttons to unlatch the casing on
both sides, arrow
1.
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG