BMW X6 M 2010 - Manual (Page 76)

Everything under control
74
Displays on Control Display
You can also access the computer using iDrive.
1. "Vehicle Info"
2. "Onboard info" or "Trip computer"
Displays on the "Onboard info":
> Cruising range
> Distance from destination
> Estimated time of arrival if:
> Entering a distance manually in the com-
puter, see below.
> A destination was entered in the naviga-
tion system
* , refer to page 141 .
Displays on the "Trip computer":
> Departure time
> Trip duration
> Trip distance
Both displays show:
> The average speed and
> the average fuel consumption.
Resetting the fuel consumption and
speed
You can reset the values for the average speed
and average fuel consumption:
1. Select the respective menu item and press
the controller.
2. To confirm your selection, press the con-
troller again.
Resetting the Trip computer
You can reset all values:
1. "Vehicle Info"
2. "Trip computer"
3. "Reset"
Service requirements
The remaining driving distance and the date for
the next maintenance are displayed briefly with
the ignition switched on.
To determine the extent of maintenance
required, you can also display the remaining
distance or the service date individually in the
instrument panel.
ba8_e70ag.book Seite 74 Freitag, 5. Juni 2009 11:42 11
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG