BMW 328d xDrive Sports Wagon 2014 - Manual (Page 215)

arrow 2. Make sure that the tail lamp en‐
gages in the rubber mount.
4. Screw the two nuts tight and mount the
cover.
Lamps in the tailgate
General information
Follow general instructions, refer to page 208 .
Reversing lamps: 16-watt bulb, PW16W.
Inner brake lamps: 21-watt bulb, H21W
Accessing the lamps
Slide the cover outwards, arrow, and remove.
Replacing the reversing lamp and inner
brake lamp
1. Loosen the two holders, arrow 1 and pull
down on the lamp holder to remove, ar‐
row 2.
2. Unscrew the defective bulb of the revers‐
ing or brake lamp from its socket counter‐
clockwise.
3. Insert the new bulb.
Installing the bulb holder
1. Slide the bulb holder onto the two guide
pins, arrow 1. Insert the two contacts, ar‐
row 2, into the connections, arrow 3.
2. Press on the bulb holder. Make sure that
the two exterior holders latch into place.
3. Place the cover back in position and slide it
inwards.
Tail lamp, license plate lamp and
central brake lamp
Follow general instructions, refer to page 208 .
These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.
Seite 215
Replacing components Mobility
215
Online Edition for Part no. 01 40 2 925 793 - II/14