Freedom Designs Freedom NXT - Manual (Page 5)

Freedom Designs, Inc. Freedom Designs, Inc.
3
NXT
Generation NEXT
TM
Warnings and Caution statements included in this manual describe conditions and unsafe
practices which might result in bodily injury or property damage. Read this entire manual
before assembly or operation of this wheelchair. If you do not understand any of the
instructions in this manual, call your authorized Freedom Designs, Inc. provider. Note:
Where they apply, you will also fi nd “Warnings” in other sections of this manual. Heed all
warnings in this section.
General Warnings ! !
W W
A A
R R
N
N
II
N N
G G
!
!
The weight limit for the NXT tilt is a 225 lb. person. If the person exceeds the
weight limit (including items carried), damage to your chair, a fall, tip-over or loss
of control may cause severe injury to the rider or others.
Every wheelchair is different. Become familiar with your chair before you
begin riding. Start slowly, with easy, smooth strokes. Be careful not to use too
much force, which might result in tipping over, damage to your chair, a fall, or
loss of control, which may occur and cause severe injury to the rider or others.
Reduction of Risk of an Accident:
1. BEFORE riding, you should be trained in the safe use of this chair by your
health care advisor.
2. Practice bending, reaching and transfers until you know the limit of your ability.
In order to avoid tipping over, have someone help you, until you know what
can cause a fall.
3. Be aware that you must develop your own methods for safe use best suited
to your level of function and ability.
4. NEVER try a new maneuver on your own until you are sure you can do it safely.
5. Get to know the areas where you plan to use your chair. Look for hazards
and learn how to avoid them.
Safety Checklist
1. Before each use of your chair:
2. Make sure the chair rolls easily and that all parts work smoothly. Check for
noise, vibration, or a change in ease of use. (They may indicate low tire
pressure, loose fasteners, or damage to your chair).
3. Repair any problems. Consult your Freedom Designs, Inc. authorized provider
for help in fi nding or correcting the problem.
4. Check to see that both quick-release axles are locked. When locked, the
axle button will “pop out” fully. If not locked, the wheel may come off and
cause you to fall.
Adjustments
1. If you modify or adjust this chair, it may increase the risk of a tip-over UNLESS
you make other changes as well.
2. Before any adjustments or modifi cations are made to your chair, consult
your authorized Freedom Designs, Inc. provider.
3. Unauthorized modifi cations or use of parts not supplied or approved by Freedom
Designs, Inc. may damage the chair structure. This will void the warranty
and may cause a safety hazard.
If you fail to heed these warnings, damage to your chair, a fall, tip-over, or
loss of control may occur and cause severe injury to the rider or others.