FASS FA D09 095G - Manual (Page 3)

FASS Recommended Application
FA D09 095G Cummins (12 Valve) 1994-1998 with stock - moderate horsepower
modifications pumping to the factory mechanical lift pump
Note: Due to the increase of fuel flow you may encounter a problem with the stock fuel
module. Adding a FASS suction tube kit will solve that issue.
Serial #
¡WARNINGs!
 Read all instructions before starting installation of this product!
 Installing the improper FASS Pump can cause severe engine damage.
 Secure vehicle from ROLLING!
 Use caution when drilling. Steer clear of any electrical wires , air lines or other damageable
components.
 Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-
tempting any electrical connections.
 Be sure that the serial # on this installation manual matches that of the outside of the box.
 Flush and clean all brass fittings and fuel line from debris.
 Keep debris from entering the internals of the system during installation. Getting debris in
the “T” port can lock up the motor. If the motor does lock up from debris call FASS for
technical assistance.
 Be sure to utilize the inline fuel filter included in this kit, or the equivalent, to prevent a
motor lock up.
 Wear safety glasses when operating power tools such as drills and grinders or when using a
punch or chisel.
 Properly secure lines to prevent chaffing.