FASS T D09 095G - Manual (Page 17)

 Blow out any open lines/cover any open ports
 Bolts and fasteners properly tightened?
 Electrical harness and fuel lines secured and properly tightened? Reconnect the battery.
 Has the system been primed?
1. Turn key to the ignition position, turning on the FASS pump for 15 sec..
2. Crank engine and allow to run for at least 1 minute.
 Check for leaks.
 Start the engine
 Recheck all fluid and filter connections for leaks
 This pump comes with a 1 Year Manufacturer’s Warranty based on the date it has been manufactured.
To receive your extended Lifetime Warranty, you have 30 days from date of purchase to send the com-
pleted warranty information along with a copy of the purchase receipt in to Diesel Performance Prod-
ucts, Inc. Att: Warranty 16240 Hwy O Suite B Marthasville, MO 63357
Note: O-Ring must be put back on suction side of pump.
Failure to do so can result in priming issues, cavitation, or
pressure loses.