EcoPure MW_MW40_450216A - Manual (Page 4)

..................................................AUTOMATIC WATER SOFTENER
SPECIFICATIONS / DIMENSIONS
MODEL MW-40
RATED CAPACITY (grains @ lb salt dose) 11,700 @ 2.3
30,800 @ 8.5
39,000 @ 14.7
RATED EFFICIENCY
①
(grains/lb @ lb salt dose)
5100 @ 2.3
AMOUNT OF HIGH CAPACITY RESIN (lbs / cu ft) 56.2 / 1.08
RESIN TANK NOMINAL SIZE (in., dia x height) 9 x 40
SERVICE FLOW RATE (gpm) 10
PRESSURE DROP AT SERVICE FLOW 14
INTERMITTENT FLOW RATE @ 15 psi
③ 10.2
WATER SUPPLY MAXIMUM HARDNESS (gpg) 110
WATER SUPPLY MAX. CLEAR WATER IRON (ppm)
② 5
WATER PRESSURE LIMITS (min. / max. psi) 20 – 100
WATER TEMPERATURE LIMITS (
o
F) 40 – 120
WATER SUPPLY MINIMUM FLOW RATE (gpm) 3
REGENERATION CYCLE FLOW RATES (gpm)
FILL (flow to brine tank) .3
BRINING 0.22
BRINE RINSE 0.15
BACKWASH 2.3
FAST RINSE
(flow to drain)
2.3
This system conforms to NSF/ANSI 44 for specific performance claims as verified and substantiated by test data.
① Efficiency rating is only valid at the lowest salt dosage. These softeners were efficiency rated according to NSF/ANSI Standard 44.
② Capacity to reduce clear water iron is substantiated by WQA test data.
③ Intermittent flow rate does not represent the maximum service flow rate used for determining the softeners rated capacity and efficiency.
Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
MW-40