Drucker Diagnostics QBC Horizon 755VES Centrifuge (120V, 60Hz) - Manual (Page 11)

Section 3
INSTALLATION AND SET-UP
3.1 PACKAGING AND PARTS
The QBC Capillary Centrifuge and Power Pack are shipped in a single container, together with the following parts,
test accessories and instructions (Figure 3-1):
• Rotor Cover Assembly • Head Nut Wrench
• Two Power Pack Line Cords (see below) • Rotor Removal Wire
• Operating Instructions (this Manual)
Note: For use of the centrifuge in Continental Europe, an alternate line cord is provided with the Power Pack.
Select the appropriate line cord and discard the unused cord.
3.2 INSTALLATION AND SERVICE
For first-time users of the QBC System, a representative of QBC Diagnostics Inc. or your local QBC System
distributor will normally install the required equipment; the installer will also train operating personnel in proper
use of the equipment. If necessary, contact your nearest QBC Diagnostics Inc. office to arrange for installation
service.
6
Figure 3-1. QBC Capillary Centrifuge, Showing Parts and Accessories.
(Note: Centrifuge is supplied with rotor installed.)