Drew Technologies IMclean? DAD - Manual (Page 12)

12
Using Wireless
1. You must only have One (1) IMclean BT paired with your PC at any time.
The IMclean driver will inform you if you have multiple devices paired to
your PC and will stop functioning.
2. The IMclean DAD wireless connection has a range of up to 100 feet.
Actual wireless range depends on the environment the DAD is operated in.
As the DAD is moved away from the PC with the Bluetooth connection,
performance will decrease and eventually the connection will fail.
3. When connecting the IMclean Wireless DAD to the vehicle, you may need
to wait up to 30 seconds for the Bluetooth to power up and be detected by
Windows.
Using Auxiliary Power
1. If the Vehicle LED is not lit or there is a "Low Voltage" message from the
system tray application when the IMClean is connected to the DLC, there
may be a lack of power or bad ground at the DLC.
2. Plug the cigarette lighter adaptor in the cigarette lighter port and Check the
red LED on the cigarette lighter adaptor is lit, if so go to step 4.
3. If there is not power at the cigarette lighter, disconnect it and use the 12V
battery cable and connect the clamps to the battery.
4. Plug the opposite end into the IMClean.
5. Check the Vehicle LED.
6. If the LED is lit, Proceed with test. If not, diagnose power issue.