Dogtra 210 Series User Manual
Page 10

17
COLLAR / RECEIVER
16
COLLAR / RECEIVER
Fitting the Collar on the Dog
The collar should be fitted so that the
stainless steel contact points press firmly against
the dog’s skin.
A loose fit can allow the collar to move
around on the dog’s neck. When this happens the
contact points may rub the skin and cause
irritation. If the collar is too loose, electrical
contact will be inconsistent and your corrections
will be inconsistent also.
Receiver Indicator Light (LED window)
Located on the front of the collar, the
indicator light comes on and blinks once every 2
seconds after the collar is turned on. The color of
the LED indicates the battery life of the receiver.
(green = full charge, amber = medium charge,
red = needs charge)
When the “Constant” button on the
transmitter is pushed, the collar indicator light
will glow steadily as long as you hold the button
down, for up to twelve seconds. When the
“Nick” button is pushed, the light comes on for a
fraction of a second.
Indicator Light (LED)