Dogtra 1700 Series - Manual (Page 8)

13
TRANSMITTER
Transmitter Battery Charging Receptacle
Located on the backside of the transmitter,
the receptacle is covered by a rubber plug. Insert
one end of the battery charging cable into the
receptacle to charge the battery (See Battery
Charging Procedure on page 28.)
After charging is completed, close the
receptacle with its rubber plug to make sure dirt
or water does not get inside.
12
TRANSMITTER
LCD (Liquid Crystal Display) Transmitter
Screen
The LCD panel indicates the stimulation level
(0 - 127) on the screen. (P) appears when the
Pager is pressed. The battery life indicator shows
3 bars at full charge, 2 bars at medium charge
and 1 bar when it needs to be charge.
Care for LCD Transmitters in Cold Temperature
In cold temperatures (10 degrees F or below),
the liquid crystal display (LCD) on your
transmitter may be dim or slow to respond. Wait
until the display becomes visible before selecting
any training level. Suggestion: Carry your remote
close to your body as your body’s warmth can
improve operation and viewing of the LCD
screen.