Dick SM-90 230V - Manual (Page 50)

SM-90 lamellar grinding machine 18
Putting into operation
7
Adjusting the deflector plates
Adjust the distance [2] between the deflection plate [3] and the
polishing wheel [1] to 2 mm.
• Adjust the distance using the star knob [4].
WARNING
Risk of injuries due to rotating machine parts
• The distance between the deflection plate and polishing
wheel or the deflection plate and lamellar grinding wheel
(adjusting the deflection plate) must be checked each time
before starting work using the lamellar grinding machine, and
if necessary readjusted.
Figure 7.2 – Adjusting the deflection plates
[1] Polishing wheel
[2] Distance (2 mm)
[3] Deflection plate
[4] Star knob
1
2
3 4