Bissell 6355E - Manual (Page 8)

w w w. b i s s e l l . c o m
O
perations
8
M
aintenance and care
empty dirt container
Empty when dirt reaches the “Full” line
on the container.
1. Turn power OFF. Unplug power
cord from electrical outlet.
2. Slide Lock ‘n Seal lever to
“Unlock” position.
3. Grasp dirt cup handle portion and
pull straight out to remove from
vacuum and empty.
4. Place dirt container back in the vacuum
and slide lever to lock position.
note: the dirt container may
be washed in warm water with
mild detergent. Make sure it is
completely dry before replacing.
do not wash in dishwasher.
cleaning the inner
& outer circular filter
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Remove dirt container and filter cup.
Grasp the filter located at the bottom of
the filter cup, lift and pull straight out.
do not pull ciRculaR foaM
filteR out of the filteR cup
While it is still in the VacuuM.
3. Grasp the plastic tab on the top of
the circular foam filters; twist to unlock
and pull out.
Full Line
Lock
Position
Unlock
Position
3.
2.
2.
3.
WaRning:
Do not operate cleaner with
damp or wet filters or without
filters in place.
notice:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges. The
discharges are entirely harmless and
are not associated in any way with
the main power supply.