Bissell 61Z4 - Manual (Page 8)

w w w. b i s s e l l . c o m
O
perations
8
using the tools
1. Make sure the vacuum is in the upright
position.
2. Remove the hose wand from the wand
base. This automatically diverts the
suction to the hose. Unwrap the hose from
the vacuum.
3. Use the hose and wand alone or attach
any of the tools to the end of the hose
wand.
turbobrush ™ tool
use rotating brush action for small
areas such as stairs and upholstery.
note: press gently when using the
turbobrush to gain maximum
cleaning. too much pressure could
cause the brush to stop rotating.
combination brush
use longer soft bristles for dusting.
Remove long bristle portion and use
shorter stiff bristles when agitation is
needed to remove debris.
crevice tool
use in tight narrow spaces
telescoping extension wand
use with desired attachment for a
longer reach. to extend the wand,
twist the collar to “unlock” and push
away from you. twist the collar to
“lock” into place. to retract, twist to
unlock, pull toward you and twist to
relock.
attention:
Always place the vacuum
vacuum on the floor in its fully
upright position when using
tools. Placing the vacuum in
this position automatically
stops the rotating brush.
caution:
To avoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottom of the stairs.
2.
Collar