Bissell 61Z4 - Manual (Page 17)

w w w. b i s s e l l . c o m
17
T
roubleshooting
Vacuum cleaner is difficult to push
possible causes Remedies
1. Incorrect height setting 1. Turn dial to higher setting
Visible dust escaping from cleaner
possible causes Remedies
1. Filter door and or gasket missing 1. Check filter door and gasket
or not installed properly
2. Foam filter missing or not installed properly 2. Check foam filter for correct installation
3. HEPA filter cartridge missing or not installed properly 3. Check HEPA filter cartridge for correct installation
4. Dirt container not installed properly 4. Make sure dirt container is correctly positioned and snapped
into place
5. Dirt container not assembled properly 5. Check screen, upper and lower portions of the dirt container
for proper assembly
6. Hose not installed properly 6. Make sure hose wand is fully seated in base, and that the
hose is assembled correctly to the unit. See page 5. Also
make sure foot hose is properly attached to diverter area
7. Hole or crack in hose 7. Check hose for holes or cracks and replace if needed
other maintenance or service not included in the manual should be
performed by an authorized service representative.
thank you for selecting a bissell product.
please do not return this product to the store.