Aintenance and care, Thermal protector – Bissell 5307e User Manual
Page 12
w w w. b i s s e l l . c o m
M
aintenance and care
12
Use to vacuum carpets and rugs. Swivel head
turns to get into tight spaces and fits under
cabinets. Easy to remove nozzle window for
cleaning threads and debris from the brush roll.
Squeeze the 2 small tabs at the side of the foot
to release the window. To replace align the
window tabs at the top with the 2 openings of
the foot and push into place until you hear a
snap and the window is securely in place.
Selected Models only 4124E & 5307E)
The Pet TurboBrush™ Tool should be
checked regularly for clogs or debris
wrapping around the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible,
turn the collar on the neck of the Pet
TurboBrush™ Tool counterclockwise to the
unlocked position to remove the faceplate
and clear any obstructions.
3. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4. Reposition the drive belt on the brush.
Place the ends of the brush in the slots
on the sides. Reposition the faceplate
and turn the collar clockwise to the
locked position.
Thermal protector
An internal thremal protector has
been designed into your vacuum to
protect it from overheating. When
the thermal protector activates, the
vacuum motor will stop operating.
If this happens:
1. Turn the vacuum OFF (O) and unplug
from electrical outlet.
2. Empty dirt container, check filters and air
passages for dirt accumulation.
3. The thermal protector automatically
resets after approximately 1 hour. If the
thermal protector does not reset, call
BISSELL Consumer Services.
Care and Maintenance of Turbine Head Floor tool (Model 5307E)
Maintaining the Pet TurboBrush™ Tool