Aintenance and care, Replacing the febreze, Post-motor filter – Bissell 5307e User Manual
Page 11
w w w. b i s s e l l . c o m
11
M
aintenance and care
The post motor filter is a Febreze®
filter that is designed to eliminate
odors while you vacuum during the
regular life of the filter. It is a white
pleated filter that is NOT washable
and must be replaced when neces-
sary. The filter should be checked
when the collection tank is emptied
and replaced if dust and debris has
accumulated on the filter. To maintain
full odor elimination, the filter should
be replaced when the fragrance is no
longer present.
1. Turn the power OFF. Unplug the vacuum
from the electrical outlet.
2. The post-motor filter is located behind
the door labeled “FILTER” on the rear of
the vacuum. Open the door by pushing
down on the tab of the door and pulling
out to remove.
3. Remove the post-motor media filter by
grasping the handle on the filter and
pulling out to remove.
4. Replace the post-motor Febreze
®
filter
with a new filter.
5. Replace the filter door by inserting the two
tabs at the bottom of the filter door. Then
push down on the tab on the door and
push it back into the vacuum. Release the
tab on the door to lock into place.
Replacing the Febreze
®
post-motor filter
Post-Motor
Filter
2.
3.