Warning, Please do not return this product to the store, Roubleshooting – Bissell 1623E User Manual

Page 13

w w w . b i s s e l l . c o m

WARNING:

To reduce the risk of fire, electric
shock or injury, unplug from the
outlet before servicing.

roubleshooting

Reduced Spray OR No Spray

Possible cause

Remedies

1. Bladder may be empty

1. Turn power switch OFF; Refill bladder

with clean hand hot tap water.

2. 2-in-1 water tank may not be seated properly.

2. Turn power switch OFF; remove and

reseat tank.

3. Pump may have lost prime.

3. Turn power switch OFF; after 1 minute

turn ON and depress spray trigger.

4. The pump belt may be broken.

4. Turn power switch OFF and unplug from

the outlet. To check if a pump belt has broken,

you will need a flat head screwdriver.

A. Insert the blade end into the slot of the

belt access door to release. Examine the

belt for breakage. You should be able to see

the pump belt looped around the motor shaft.

If it is broken or missing, please refer to

Replacement Parts on page 15 before calling

BISSELL Consumers Services. Complete

installation instructions will accompany the

replacement belt.

B. When replacing belt access door be sure to

line up slots of belt access door with slots in

machine, slide door into place and snap shut.

DirtLifter PowerBrush Does Not Turn

Possible cause

Remedies

1. The brush belt or pump belt is off or broken.

1. Refer to Remedy 4 above to check if brush

belt or pump belt is broken.

Cleaner Not Picking Up Solution

Possible cause

Remedies

1. Removable nozzle may not be properly attached.

1. Make sure nozzle is on correctly by slightly

raising front of machine to line up slots on the

base of the machine with the hooks on nozzle.

Attach at base first and then click nozzle into place.

2. 2-in-1 water tank lid is not properly installed.

2. Re-install lid; refer to the image on page 7.

3. 2-in-1 water tank is not properly seated.

3. Tank must be firmly seated to function;

remove and reseat tank.

4. 2-in-1 water tank has picked up maximum dirty water. 4. Empty tank and refill, refer to the

Operation section.

5. The lint screen may be clogged

5. Clean out lint screen. Refer to page 8.

Slots

Pump Belt

Other maintenance or service not included in the manual should be performed by an

authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store

ug120-4039_1623E_508.indd 13

5/19/08 12:30:04 PM