Bissell 1623E - Manual (Page 11)

11
w w w . b i s s e l l . c o m
Hard Floor Cleaning continued
6. Plug into an outlet and turn the power ON.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9. Repeat the motion without pressing the
spray trigger, using the hard floor tool to
squeegee and suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the Maintenance section on page 12 for
machine clean up and storage instructions.
O
peration
ug120-4039_1623E_508.indd 11 ug120-4039_1623E_508.indd 11 5/19/08 12:30:04 PM 5/19/08 12:30:04 PM