Bissell 44L6E - Manual (Page 10)

w w w . b i s s e l l . c o m
10
o
perations
6. To continue carpet cleaning, refer back to
pages 8 through 9, beginning with “Fill
the 2-in-1 water tank” on page 8.
If cleaning is complete, refer to the
“Maintenance and care” section on
page 12.
Ready Tools™
Your CleanView ® PowerBrush comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
Important! If using the machine
to clean upholstery, check uphol-
stery tags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your deep cleaner. If the tag is coded
with “X” or “S” (with a diagonal strike
through), or says “Dry Clean Only,” do
not proceed. Do not use on velvet or silk. If
manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2. Check for colourfastness in an
inconspicuous place.
3. If possible, check upholstery stuffing.
Coloured stuffing may bleed through fabric
when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds and tufts.
6. To begin cleaning with attachments, follow
the instructions on pages 7-8 for filling the
2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS set-
ting. This will allow spray and suction from
the hose.
8. Attach the cleaning tool to the end of the
hose.
7.
Tip:
To clean with sliding
crevice tool, slide brushes
forward to clean stain, slide
back to suction
Adsdfdd ghg bvh cvbbj jkn hnbj
jkvh
gcghhjj jhffhl k
llgh
Manufacturer’s tag
Empty the 2-in-1 water tank/clean removable nozzle continued