Maytag GEMINI - Manual (Page 37)

©2000 Maytag Appliances Sales Company
16010107 Section 5. Troubleshooting 5-7
FAULT IDENTIFICATION SUMMARY
Fault Suspect Failure Area Correction When Checked
F0-0 No Fault None Anytime
F1-1 Runaway Cook Upper Oven Check the sensor 1050-1100
ohms, wiring, control Every 6 seconds that the
control sees the latch
unlocked.
F1-2 Runaway Cook Lower Oven Check the sensor 1050-1100
ohms, wiring, control Every 6 seconds that the
control sees the latch
unlocked
F1-3 Runaway Clean Upper Oven Temperature above 650º F.
Check the sensor and
control
Every 6 seconds that the
control sees the latch locked
F1-4 Runaway Clean Lower Oven Temperature above 650º F.
Check the sensor and
control
Every 6 seconds that the
control sees the latch locked
F1-5 Cancel Keypad Upper Oven Replace Control Every 30 seconds
F1-6 Cancel Keypad Lower Oven Replace Control Every 30 seconds
F1-7 Keypad Disconnected Replace Control Every 30 seconds
F1-8 Keypad Shorted Replace Control Every 30 seconds
F1-9 Slave Replace Control Every 30 seconds
F1-A Latch Switch Upper Oven Check that upper latch
switch is closed Every 30 seconds
F1-B Latch Switch Lower Oven Check that lower latch switch
is closed Every 30 seconds
F1-C Door Open Upper Oven Check that door position
switch is closed Every 30 seconds
F1-D Door Open Lower Oven Check that lower door
position switch is closed Every 30 seconds
F1-E EEPROM Replace Control Every 6 seconds
F1-F Jumper Replace Control Every 30 seconds
F1-H EEPROM Read Error Replace Control Anytime
F1-L Sensor Wire Ohm sensor wire end to end
to ensure a closed path
Anytime at least one oven is
active
Continued...