Power on & off, Braking, Know the hazards – Crown Equipment Walkie Lift Truck WR Series User Manual
Page 9
Power On & Off
KEY SWITCH
Turn the key clockwise. Power is ON.
Turn the key counterclockwise. Power is OFF.
Always turn the key off when leaving the truck.
POWER DISCONNECT
Push the battery connector handle down to disconnect the
battery and cut all power.
Always disconnect the battery any time the truck isn't
working right. The key switch does not cut all power to
the truck.
Don't use the truck if it's not working right. Report the
problem to your supervisor.
15 Power On & Off
Know the Hazards
Braking
MAKE SURE YOUR BRAKE WORKS
Test the brake on your truck at the start of each shift.
Know the distance it takes to stop before you start
working.
If at any time the stopping distance is too long for you to
stop safely, don't use the truck. Report any problem to
your supervisor.
BRAKING
Move the control handle all the way down or all the way
up to apply the brake.
When you let go of the control handle it will automatically
go to the upper braking position. Check braking before
you start working.
Braking 16
Brake
On
Brake On
Brake Off
PUSH DOWN
?