Crown Equipment Walkie Lift Truck WR Series - Manual (Page 13)

Be a Safe Operator
23 Be a Safe Operator
MAKE SURE YOU ARE READY
• Do not use this truck unless you are trained
and certified.
• Be certain you understand how your truck works and
the hazards that go with it. Don't use the truck if you
have any doubts.
• Know the capacity of your truck. Make certain you use
the correct units of measure.
• Some trucks are not allowed in areas where there are
fire hazards. Be certain your truck is the correct fire
safety type for the area.
• Make sure your hands and shoes are clean and dry, and
your clothing is proper for the job.
MAKE SURE YOUR TRUCK IS READY
• Inspect your truck before using it (see pages 21 and 22).
If it's not working right, or something is broken, report
the problem to your supervisor. Don't use the truck.
• In an open area, test the braking. Check at a slow travel
speed first, then a faster one. Know the distance it takes
to stop before you start work.
T h e m o s t
i m p o r t a n t
c o m p o n e n t
i s y o u .
?
Be a Safe Operator 24
USE CAUTION, BE ALERT
• Watch where you're walking. Don't let any part of your
body get pinned or crushed between the truck and a
fixed object.
• Stay to the side of the truck when traveling power unit
first. Make sure the truck won't hit your leg or run over
your foot.
• When traveling forks first keep both hands on the control.
Be careful when changing direction. Keep your feet
clear of the truck.
• Travel in the direction that gives you the best view. Look
where you are going and slow down in congested areas.
• Slow down for wet or slippery floors. Don't run over
things. Watch out for rough floors.
• Travel with the forks close to the ground (plus retracted
and tilted back on the WR). Place the load against the
load backrest or vertical face of the forks.
• Look where you are going before you change direction
of travel.
• See that you have room to drive and turn. Watch out
for power unit swing.
• Slow down when making turns.
• Avoid sudden movement of controls. Learn to use them
smoothly at a moderate, even rate.
• Check clearances before raising or lowering the forks.
• Be extra careful if you must use your truck in an area
where there is a risk of falling objects.
• Never ride on your truck.
Continued next page...
Recommended
Walking Path