Cooper Instruments & Systems Model 5i Advanced Force/Torque Indicator User Manual
Page 26

Model 5i Digital Force / Torque Indicator
User’s Guide
25
Displayed at the start of calibration if a disallowed unit is selected.
Ensure that the load is not swinging, oscillating, or vibrating in any manner. Then try again.
The calibration weight does not match the set value.
The entered calibration point is too close to the previous point.
CALIBRATION
TENSION
LOAD TOO CLOSE
TO PREVIOUS
PLEASE TRY AGAIN
LOAD NOT STABLE
PLEASE TRY AGAIN
CALIBRATION
Units must be gF.
PLEASE TRY AGAIN
PRESS ENTER
CALIBRATION
COMPRESSION
LOAD TOO LOW
PLEASE TRY AGAIN