BE Pressure supply 5 Gallon Twin Tank Air Compressor AC205X - Manual (Page 17)

17
CAUTION
Do not attach air tools to open end of the hose until start-up is com-
pleted and the unit checks out OK.
AUTO
OFF
operation
OPERATION AND ADJUSTMENT
1. The compressor is controlled by pressure switch when normal
working. It can be stopped automatically as pressure increasing to the
maximum and restart as pressure decreasing to the minimum. The rated
pressure has been adjusted when produced. Don’t change it carelessly.
As soon as motor switched off, the compressed air in the discharge pipe
should be released through the release valve under the switch. This is the
necessary condition for restart, or the motor will be damaged.
2. The output pressure of compressed air can be adjusted by regulating
valve. Pull up the knob of regulation valve and turn it clockwise to
increase the pressure (Fig.3).
3. When the compressor in running need to be stopped, only set the
handle of pressure switch in position off.
SWITCH HANDLE
FIG. 3