Amico Skyline Overbed Light Series - Manual (Page 3)

Introduction
General Information
Thank you for purchasing the Skyline overbed light. Incorporating the latest technology the Skyline
light is designed to provide high quality illumination while meeting the aesthetic requirements of the
patient room.
The installation provided are for the Amico standard products.
WARNING
The installation of the light shall be in accordance with the local building code and the
(NEC) National Electrical Code.
In Canada the lights shall be installed according to the (CEC) Canadian Electrical Code
requirements.
Failure to install the light in accordance with these requirements may cause injury and
equipment damage.
WARNING
Read all the installation instructions before you install the Skyline Series Overbed Light fixture. Failure to
do so could cause injury and damaged equipment.
Read all of the installation instructions before you install the light fixture.
Make sure all applicable trades persons are available for the installation of the light fixture.
WARNING
Keep weather insulation at least 3.00" (7.62cm) from the Skyline Series Overbed Light.
Failure to do so could cause injury or damaged equipment.
Electrical Ratings
Electrical ratings (read the specified voltage value from the device label):
Line voltage:
• 120V AC, 60Hz, 1.1A
• 277V AC, 60Hz, 0.476A
1.
2.
www.amico.com 3