Amico Hydraulic Patient Transfer Stretcher (S-H-300) - Manual (Page 10)

Description of Features
Hi-lo Control
The hi-lo function foot pedals are on each side of the stretcher.
To raise the stretcher, press the Up control pedal and pump it until the desired height is reached.
To lower the stretcher, press and hold the down control pedal until the desired height is reached.
WARNING:
It is recommended that the stretcher be in the lowest position when the patient is unattended. This may help reduce the
severity of any injuries resulting from patient falls.
CAUTION:
Use caution when lowering the stretcher. Make sure items in the storage
compartment do not interfere with the upper frame or siderail mounting
brackets otherwise equipment damage could occur.
10 Amico Beds