beautypg.com

Installation – Amico Majestic Series Single Tier Surface Mounted Headwall User Manual

Page 6

background image

6

Amico Architectural

Installation

7. Hang the headwall unit on the wall, over the mounting bracket, and center the unit with refer-

ence to bed center line. Verify rough-in locations in wall and align with rough-in provisions on

headwall.

8. Make all necessary medical gas and electrical connections at rough-in locations.

9. Secure headwall to the wall through lower section using hardware compliant to local building

codes (provided by others). Lower bracket is to be drilled on-site according to stud location.

Replace lower headwall cover when done.

10. Replace any fascia panels and covers removed in step 5 and 6.

End plate and cover removed in this

view to show detail. Do not remove!

Note

lower mounting locations