Great Plains CTA4000 Operator Manual - Manual (Page 31)

29
Section 7 Specifications and Capacities
2/1/06 CTA4000 Air Drill Implement 160-269M
Great Plains Mfg., Inc.
Section 7
Specifications and Capacities
Operating Width 40 ft
Transport Width 18 ft
Transport Height 14 ft
Length 13 ft 9 in
Overall Length, Cart and Implement 30 ft 6 in
Wing Flexibility 15 degrees down, 20 degrees up
Transport Tires 11L - 15 8-Ply
Row Spacings 6 in 7 1/2 in 10 in
Number of Rows 80 65 50
Base Unit Weight 13,673 lbs 12,660 lbs 11,648 lbs
Weight Per Row, Base Unit 171 lbs 195 lbs 233 lbs
Maximum Additional Weight 2800 lbs
Tractor Power Requirements 180 to 240 hp (Power requirements will vary with tractor size, soil type,
terrain and tillage practices.)
Tractor Hydraulic Requirements Closed-center hydraulics
Three sets of hydraulic outlets
Capacity of 18 to 30 gpm at 2000 psi
Equipped so a return line can be plumbed directly to the tractor hydraulic
reservoir
Tractors with load-sensing hydraulics may require a bypass valve, Great
Plains part number 810-400C. Contact your tractor dealer to verify if the
valve is needed.
NOTE: All tires are warranted by the original manufacturer of the tire. Tire warranty information can be found in the bro-
chures included with your Operator’s and Parts Manuals or online at the manufacturer’s websites. For service assistance
or information, contact your nearest Authorized Farm Tire Retailer.
Manufacturer Website
Titan www.titan-intl.com
Goodyear www.goodyearag.com
Firestone www.firestoneag.com