Great Plains 6328 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 55)

Revision Comments Part Description Part No. Ref.
Image No. dwg00347
(shown) SHANK 9/16X1 3/4X30 MIN DRAFT 820-297C 1.
SHANK 9/16X1 3/4X30 FLAT 820-293C 1.
SPRING PLUG, TOP, LIGHT DUTY 552-014D 2.
SPRING EXT 2.25OD .374W 9.75L 807-267C 3.
SPRING PLUG BOTTOM 812-148C 4.
Includes items 2 thru 4 SPRING/PLUG SUB ASSY 552-050V 5.
SHANK CRADLE 552-043H 6.
SHANK UPRIGHT F/4" TUBE 552-006D 7.
1 X 3/4 X 3" HARDENED BUSHING FC0333 8.
U-BOLT 5/8-11X4 1/32X4 3/4 806-158C 9.
NUT LOCK 5/8-11 PLT 803-024C 10.
HHCS 1/2-13X1 1/2 GR5 SPCL THD 802-507C 11.
RHSNB 3/4-10X4 1/8 GR5 SPTHD 802-485C 12.
NUT HEX JAM NYLOCK 3/4-10 PLT 803-126C 13.
HHCS 1/2-13X3 GR5 SPCL THD PLT 802-535C 14.
NUT LOCK 1/2-13 PLT 803-019C 15.
HHCS 5/8-11X2 GR5 802-055C 16.
NUT HEX NYLOCK 5/8-11 PLT 803-148C 17.
SWEEP, 1/4" X 7" 820-294C 18.
SWEEP, 1/4" X 7" HARD FACED 820-292C 18.
SWEEP, 1/4" X 7" ULTRA WING 820-291C 18.
1/4" X 9" SWEEP FC1875 18.
1/4" X 9" HARD FACED SWEEP FC1879 18.
1/4" X 9" ULTRA WING SWEEP FC2042 18.
1/4" X 10" SWEEP FC1876 18.
1/4" X 10" HARD FACED SWEEP FC1880 18.
1/4" X 10" ULTRA WING SWEEP FC2043 18.
1/4" X 11" SWEEP FC1877 18.
2.00-1/4" X 11" HARD FACED SWEEP FC1881 18.
1/4" X 11" ULTRA WING SWEEP FC2044 18.
PLOW 7/16-14X1 3/4 GR5 802-090C 19.
WASHER FLAT 7/16 USS PLT 804-204C 20.
NUT HEX NYLOCK 7/16-14 PLT 803-245C 21.
Includes items 18 thru 21 SWEEP, 7" W/BOLTS 575-860V 22.
Includes items 18 thru 21 SWEEP, 7" HARD FACED W/BOLTS 575-862V 22.
Includes items 18 thru 21 SWEEP, 7" ULTRA WING W/BOLTS 575-861V 22.
Includes items 18 thru 21 SWEEP, 9" W/BOLTS 570-219V 22.
Includes items 18 thru 21 SWEEP, 9" W/BOLTS, HARD FACED 575-809V 22.
Includes items 18 thru 21 SWEEP, 9" ULTRA-WING W/BOLTS 575-810V 22.
Includes items 18 thru 21 SWEEP, 10" W/BOLTS 575-807V 22.
Includes items 18 thru 21 SWEEP, 10" W/BOLTS, HARD FACED 575-767V 22.
Includes items 18 thru 21 10" ULTRA WING SWEEP W/BOLTS 575-811V 22.
Includes items 18 thru 21 SWEEP, 11" W/BOLTS 575-808V 22.
Includes items 18 thru 21 SWEEP, 11 W/BOLTS, HARD FACED 575-804V 22.
Includes items 18 thru 21 11" ULTRA WING SWEEP W/BOLTS 575-812V 22.
01/16/09 - 55 - 560-202P
Table of Contents Part Number Index
Section 5: Shanks
Regular Magnum Shank Assembly (S/N 1129CC-)
(Applies to 6113FC R H, 6116FC R H, 6318FC R H, 6320FC R H, 6323FC R H, 6325FC R H, 6328FC R H only)