Great Plains 6328 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 27)

Revision Comments Part Description Part No. Ref.
Image No. dwg00024
Center Walking Tandem AXLE SPINDLE 2X15 1/2 (Q888) 550-019D 1.
6323 - 6328 Wing Tandem AXLE SPINDLE 2X14 (Q888) 550-014D 1.
6323 - 6328 Wing Tandem AXLE SPINDLE 2X13 (Q888) 550-017D 1.
SEAL (CR16286) 816-398C 2.
SEAL SLEEVE (CR081071) 816-396C 3.
INNER CONE, JL69349 822-198C 4.
INNER CUP JL69310 822-197C 5.
Rev. 2 REP BY 800-130C 800-221C 6.
Rev. 1 Changed to 800-221C GREASE ZERK STRAIGHT 1/4-28 800-001C 6.
HUB 888 W/CUPS 6-BOLTS 6 BC" 815-142C 7.
BEARING CUP LM-67010 822-020C 8.
BEARING CONE LM-67048 822-021C 9.
WASHER SPINDLE - 7/8 804-055C 10.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 11.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 12.
GREASE CAP 2.448X1.12X.25 890-781C 13.
WHEEL BOLT 1/2-20X1 1/4 GR5 802-632C 14.
Rev. 2 Includes items 1 thru 14 HUB 6-BOLT SPINDLE 2X15.5 888 815-217C 15.
Rev. 1 RPBY 815-217C 560-135S 15.
Rev. 2 (6323 - 6328) items 1 thru 14 HUB 6-BOLT SPINDLE 2X14HH 888 815-216C 15.
Rev. 1 RPBY 815-216C 550-005S 15.
Rev. 2 (6323 - 6328) items 1 thru 14 HUB 6-BOLT SPINDLE 2X13HH 888 815-214C 15.
Rev. 1 RPBY 815-214C 550-007S 15.
01/16/09 - 27 - 560-202P
Table of Contents Part Number Index
Section 3: Transport
6-Bolt Hub & Spindle Assembly
(Applies to 6113FC R H, 6116FC R H, 6318FC R H, 6320FC R H, 6323FC R H, 6325FC R H, 6328FC R H only)