Great Plains 2410P Assembly Instructions - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
113-742M
3-Point Precision Seeding System
Marker Option
• 2410P and 2420P
General Information
Assembly Instructions
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Mark-
er Option on the 24 foot 3-point Precision Seeding
Systems.
The markers fold and unfold hydraulically for field
operation. The marker disks leave a line for the
drill operator to follow on the next field pass. Mark-
ers are mounted on the drill frame and require two
hydraulic remote valves on the tractor. A se-
quence valve is available so markers can be
operated on one hydraulic circuit.
These instructions apply to:
113-729A 24P Dual Marker Package
Marker Assemble
Refer to Figure 1.
1. Lower drill into field position. Allow 13 feet on
each end of a 24-foot drill.
2. Mount first marker section (1) on drill 7 x 5
inch frame tube (2). Mount marker at the end of
the drill using dimension "A" as a starting point.
3. Secure marker section with 5/8 inch u-bolts
(3), lock washers, washers and nuts (4). and
1/2 inch u-bolts (5), lock washers and nuts (6).
NOTE: On the 24-foot drill with 7 1/2" inch row
spacing, the last two openers are bolted to the
marker mount using 5/8 x 6 1/2 inch straight bolts
(7).
Figure 1
First Marker Section Assembly
18413
24 foot A = 11 1/2 inches
Manual Update
Refer to the 3-Point Precision Seeding System
operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and
maintaining the Marker Option. Refer to the parts
manual for part identification.
118-769M 2410P and 2420P Operator’s
Manual
118-769P 2410P and 2420P Parts Manual
Before You Start
Page 7 is a detailed listing of parts included in the
Marker Option package. Use this list to inventory
parts received.
3/21/2001