Great Plains 7560 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 43)

Great Plains Mfg., Inc. Table of Contents ►
Section 5: Shanks
6/15/2004 Series VII 7551-7560 Field Cultivator, Rigid Hitch 560-199P
5-4
Regular K-Flex Shank Assembly
Ref. Kent No. GP Part No. Part Description
Comments
1. FL1475 820-298C K-Flex Shank Mount, Regular, 3 x 4 Tube
2. FL1544 552-002D K-Flex Clamp, Regular, 3 x 4 Mount
3. FC1200 820-297C Shank, 9/16 x 1 3/4 x 30 Min Draft (shown)
FC0032 820-293C Shank, 9/16 x 1 3/4 x 30 Flat
820-354C Shank, 9/16 x 1 3/4 x 30 MD Offset 2”
4. FC1508 552-001D K-Flex Clip, 4
5. 110880 802-045C Hex Bolt, 1/2-13 x 5 Gr.5
6. 4108 804-015C Lock Washer, 1/2
7. 3008 803-020C Hex Nut, 1/2-13
8. FC0320 802-091C Hex Bolt, 1/2-13 x 1 1/2
9. 111032 802-055C Hex Bolt, 5/8-11 x 2 Gr.5
10. 3610 803-148C Nylon Lock Nut, 5/8-11
11. 820-294C Sweep, 1/4 x 7"
820-292C Sweep, 1/4 x 7" Hard Faced
820-291C Sweep, 1/4 x 7" Ultra Wing
FC1875 Sweep, 1/4 x 9"
FC1879 Sweep, 1/4 x 9" Hard Faced
FC2042 Sweep, 1/4 x 9" Ultra Wing
FC1876 Sweep, 1/4 x 10"
FC1880 Sweep, 1/4 x 10", Hard Faced
FC2043 Sweep, 1/4 x 10" Ultra Wing
FC1877 Sweep, 1/4 x 11"
FC1881 Sweep, 1/4 x 11", Hard Faced
FC2044 Sweep, 1/4 x 11" Ultra Wing
12. 802-090C Plowbolt, 7/16-14 x 1 3/4, Gr.5
13. 4007 804-204C Flat Washer, 7/16
14. 3607 803-245C Nylon Lock Nut, 7/16-14
15. FC0556 575-860V Sweep 7", w/Bolts Includes items 11 thru 14
575-862V Sweep 7", w/Bolts, Hard Faced Includes items 11 thru 14
575-861V Sweep 7", w/Bolts, Ultra Wing Includes items 11 thru 14
FC0019 570-219V Sweep 9", w/Bolts Includes items 11 thru 14
FC0559 575-809V Sweep 9", w/Bolts, Hard Faced Includes items 11 thru 14
FC1771 575-810V Sweep 9", w/Bolts, Ultra Wing Includes items 11 thru 14
FC0557 575-807V Sweep 10", w/Bolts Includes items 11 thru 14
FC0560 575-767V Sweep 10", w/Bolts, Hard Faced Includes items 11 thru 14
FC1772 575-811V Sweep 10", w/Bolts, Ultra Wing Includes items 11 thru 14
FC0558 575-808V Sweep 11", w/Bolts Includes items 11 thru 14
FC0561 575-804V Sweep 11", w/Bolts, Hard Faced Includes items 11 thru 14
FC1773 575-812V Sweep 11", w/Bolts, Ultra Wing Includes items 11 thru 14
16. FL1104 Trip Limiter Optional
17. 110888 802-046C Hex Bolt, 1/2-13 x 5 1/2 Gr.5 Optional, required with item 16
Heavy K-Flex Shank Assembly
Ref. Kent No. GP Part No. Part Description
Comments
1. FL1666 820-299C K-Flex Shank Mount, Heavy
2. FL1702 552-003D Mounting Clamp, Heavy, 3 x 4 Tube
3. FC1576 820-296C Shank, 5/8 x 1 3/4 x 30 Min Draft, Heavy
820-295C Shank, 5/8 x 1 3/4 x 30 Flat
820-351C Shank, 5/8 x 1 3/4 x 30 MD Offset 2”
All other items same as above.
5/15/2007